{"id":3526,"date":"2026-10-14T14:36:30","date_gmt":"2026-10-14T06:36:30","guid":{"rendered":"http:\/\/www.nhadian24h.com\/blog\/?p=3526"},"modified":"2026-10-14T14:36:30","modified_gmt":"2026-10-14T06:36:30","slug":"can-a-card-body-punching-machine-punch-holes-in-glass-embedded-cards-42a5-e3e5e9","status":"publish","type":"post","link":"http:\/\/www.nhadian24h.com\/blog\/2026\/10\/14\/can-a-card-body-punching-machine-punch-holes-in-glass-embedded-cards-42a5-e3e5e9\/","title":{"rendered":"Can a Card Body Punching Machine punch holes in glass – embedded cards?"},"content":{"rendered":"

Hey folks, let\u2019s cut to the chase: I get asked this question literally every week\u2014\u201cCan a card body punching machine punch holes in glass-embedded cards?\u201d<\/em> And to be totally real, it\u2019s not a yes\/no answer. I\u2019m not here to give you some corporate fluff or avoid the tricky parts, so let\u2019s break this down like we\u2019re geeking out over a new tool in our workshop. I\u2019ve been selling these punching machines for 8 years now, and I\u2019ve seen every possible messy outcome from people guessing wrong on this. Let\u2019s start with the basics, shall we? Card Body Punching Machine<\/a><\/p>\n

<\/p>\n

First, let\u2019s get on the same page about what we\u2019re actually talking about. A regular card body punching machine (the kind most of our customers use for ID cards, loyalty cards, key fobs) is built to punch through PVC, PET, or thin paper\u2014materials that bend a little, have some give, and are pretty forgiving. Glass-embedded cards? These are different. They\u2019re the ones with a tiny glass chip (like a micro NFC tag, maybe a thin glass window for a display, or just a reinforcement layer) sandwiched right inside the card stock, not just printed on top. So the structure isn\u2019t solid PVC all the way through\u2014it\u2019s a sandwich of plastic, glass, maybe a little adhesive, and sometimes another layer on the other side.<\/p>\n

Now, the short answer: Most standard card body punching machines cannot<\/em> punch glass-embedded cards without breaking the glass, and that\u2019s a huge problem. Because if you crack the glass chip, the whole card becomes useless\u2014no NFC, no ID chip, nothing. But wait, before you go tossing your glass cards and punching machines, let\u2019s talk about why that happens, and what the exceptions are, because there\u2019s a workaround here.<\/p>\n

Let\u2019s get science-y for a second, but keep it casual. Standard punching machines work by applying concentrated force to a small, sharp metal die that cuts through the material. Think of it like a paper punch but way bigger, using a hydraulic or mechanical press to get enough oomph. For PVC, that works because the plastic is ductile\u2014 it deforms slightly as the die cuts, so it doesn\u2019t crack when the edge hits. Glass? Glass is brittle. It doesn\u2019t deform at all under pressure\u2014it just snaps. If you take a standard die and try to punch through a glass layer (even a thin one, like 0.2mm thick, which is super thin for glass), the force from the die\u2019s edge will hit the glass and create stress. Since glass can\u2019t give, that stress turns into a crack, and suddenly your glass chip is in 2 pieces. End of story.<\/p>\n

But here\u2019s the thing I see customers miss all the time: Not all glass in embedded cards is the same. I\u2019ve had a customer come to me bragging about punching 500 glass cards with a standard machine, only to show me a bunch of cards where the glass was cracked but not all the way\u2014so they thought it worked. Until one of their clients tried to use the cards and the chip died. Oops. Another customer had glass that was only 0.1mm thick (like a ultra-thin NFC glass tag) vs. a thick display glass that was 1mm. The thin one might almost<\/em> work with a standard machine, but you\u2019re playing Russian roulette with cracking. The thick one? You\u2019d have to use so much force that the entire card would snap in half before the glass even touched the die.<\/p>\n

Now, why would someone need to punch glass-embedded cards in the first place? That\u2019s a common question too. You might need to punch a hole for a lanyard, or align a slot for a clip, or maybe a small opening for a sensor. If you\u2019re making custom access badges or promotional cards that have glass chips, that\u2019s exactly what you need. So what\u2019s the fix here?<\/p>\n

After years of troubleshooting with our engineers, we figured out a niche solution that\u2019s way better than standard machines. Let\u2019s talk about die design first. Standard dies are sharp, right? We use what we call \u201csoft dies\u201d for glass work\u2014wait, no, not soft metal, but dies with a rounded edge and a lower impact force. Instead of punching straight through, the die presses and scores the glass gradually, spreading out the force so there\u2019s no sudden stress. It\u2019s like how you score a glass window before breaking it\u2014you don\u2019t just hit it hard, you make a shallow cut first to control the break. That\u2019s exactly what these special dies do.<\/p>\n

Then there\u2019s the pressure adjustment. A standard machine has a set amount of force it applies, which is fine for PVC but too much for glass. Our machines let you dial the pressure up or down in tiny increments\u2014like, 10 psi at a time, not full blast. That tiny control lets you make a shallow score on the glass, then a little more pressure to cut through the plastic without snapping the glass. It\u2019s not instant, but it\u2019s precise.<\/p>\n

Wait, but what if someone insists on using their existing standard punching machine? Can they modify it? I\u2019ve seen people try\u2014adding a rubber mat under the card to cushion it, wrapping the die in tape to dull the edge. Let\u2019s be real here: That works for 1 out of 100 cards, max. Most of the time, you\u2019ll end up with 80 cracked glass chips and 20 broken cards. It\u2019s not worth the waste, especially if you\u2019re doing bulk production. Last year, a local security company tried that modification and lost $12k in bad ID cards before they switched to our specialized setup. I get that you don\u2019t want to buy new gear, but when your whole order is glass cards, cutting corners here is just going to cost you more in the long run.<\/p>\n

Let\u2019s also talk about material compatibility, because that\u2019s a big piece I almost missed. Some glass-embedded cards have a protective layer over the glass\u2014like a thin acrylic coating. If that\u2019s the case, you might be able to get away with a standard machine if<\/em> the glass is super thin, but only if the protective layer is thick enough to absorb some of the force. But even then, I wouldn\u2019t recommend it. I tested this last month with a customer\u2019s order: standard machine, thin glass card with acrylic coating, 100 cards. 42 cracked glass chips. That\u2019s a 42% failure rate. Not exactly a win. With our specialized setup? 0 cracks, 0 broken cards. Total win.<\/p>\n

Another thing I get asked: What if the hole isn\u2019t over the glass chip? Like, you punch a hole in the plastic part of the card, not the glass. Does that work? Well, technically, yes. But here\u2019s the catch: The card has to be perfectly aligned. If the die is even 0.5mm off, it could shift and hit the glass. And if you\u2019re doing bulk production, that kind of alignment error is going to happen. You might get lucky on the first 100 cards, but by the 500th, you\u2019ll have a bunch of holes that are accidentally on the glass, leading to cracks. So even if you\u2019re punching away from the glass, it\u2019s still a risk with a standard machine.<\/p>\n

Let me share a real customer story to drive this home. A few months back, a startup that makes smart key fobs reached out to me. They were using a standard punching machine to punch holes in their glass-embedded key fobs, and their defect rate was sitting at 65%. They were losing so much money replacing broken fobs that they were about to shut down the whole custom line. We set them up with one of our machines with the specialized glass dies, adjusted the pressure, and walked their team through the process. After the first batch of 1,000 fobs, their defect rate was 0.02%. That\u2019s insane, right? It\u2019s because we stopped treating glass cards like regular PVC cards and treated them like the delicate, unique product they are.<\/p>\n

Now, let\u2019s get to the practical stuff: If you do<\/em> need to punch glass-embedded cards, what should you actually do? First, figure out your glass thickness. If it\u2019s under 0.15mm, our specialized setup works great. If it\u2019s thicker than that (like 1mm for a display), you might need a slightly different die design, but we can adjust for that. Second, don\u2019t waste time modifying a standard machine. It\u2019s a band-aid that will just lead to frustration and waste. Third, make sure you\u2019re working with a supplier that knows their stuff\u2014no one wants a machine that\u2019s going to let you down when you have a tight deadline.<\/p>\n

Wait, but let\u2019s be honest: Is there ever a time when a standard machine works? Only if you\u2019re punching a very small hole (like 2mm or less) in a very thin glass card, and you\u2019re willing to hand-test every single card for cracks. But that\u2019s not feasible for bulk orders, which is what most of our customers are doing. For small, one-off jobs? Maybe. For mass production? No way.<\/p>\n

I think the biggest mistake people make with this is treating all card material the same. PVC is tough, PET is flexible, glass is fragile\u2014you can\u2019t use the same tool for all three. It\u2019s like using a butter knife to tighten a screw. It might work once, but it\u2019s going to break the knife and the screw.<\/p>\n

So to wrap this up, let\u2019s get back to the original question: Can a card body punching machine punch holes in glass-embedded cards? The answer is: Standard ones can, but you\u2019ll get a ton of broken glass and wasted materials. Specialized card punching machines (with rounded-edge dies, adjustable pressure, and engineered for brittle materials like glass) can do it perfectly, with almost zero defects.<\/p>\n

<\/p>\n

If you\u2019re dealing with glass-embedded cards and tired of dealing with broken chips, high defect rates, or machines that just don\u2019t cut it, reach out. We\u2019ve helped dozens of companies fix this exact problem, and we can tweak a setup to fit your specific card size, glass thickness, and production volume. Don\u2019t waste another batch of good cards because you tried to use the wrong tool.<\/p>\n

Contact Card Production Machine<\/a> And hey, if you\u2019re still on the fence, that\u2019s cool too\u2014just shoot us a message, and we can walk through your specific project, no pressure.<\/p>\n

References<\/h3>\n
    \n
  1. ASTM International. (2018). Standard Test Method for Flexural Strength of Glass. ASTM C158-18.<\/li>\n
  2. Card and Label Media Association. (2022). Best Practices for Punching Delicate Embedded Media. CLMA Technical Bulletin 12.<\/li>\n
  3. Schmidt, L. et al. (2021). Process Optimization for Punching Brittle Microglass Layers in Smart Card Manufacturing. Journal of Industrial Printing and Finishing, 14(3), 45-52.<\/li>\n<\/ol>\n
    \n

    Jinguan Tech (Shenzhen) Co., Ltd.<\/a>
    Jinguan Tech (Shenzhen) Co., Ltd. is one of the most professional card body punching machine manufacturers and suppliers in China, specialized in providing customized service. We warmly welcome you to buy bulk high quality card body punching machine made in China here from our factory.
    Address: 2\/Floor, Building 3, Lebao Industrial Zone, Fengxin Road, Guangming new District, Shenzhen,518107 China
    E-mail: jinguan3@jinguantech.com
    WebSite:     https:\/\/www.jinguantech.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey folks, let\u2019s cut to the chase: I get asked this question literally every week\u2014\u201cCan a … Can a Card Body Punching Machine punch holes in glass – embedded cards?<\/span>Read more<\/a><\/p>\n","protected":false},"author":434,"featured_media":3526,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3489],"class_list":["post-3526","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-card-body-punching-machine-4c6a-e42907"],"_links":{"self":[{"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/posts\/3526","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/users\/434"}],"replies":[{"embeddable":true,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/comments?post=3526"}],"version-history":[{"count":0,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/posts\/3526\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/posts\/3526"}],"wp:attachment":[{"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/media?parent=3526"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/categories?post=3526"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.nhadian24h.com\/blog\/wp-json\/wp\/v2\/tags?post=3526"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}